UPT - Rotatable Stake

1,001 additional uses for the UPT. It can be used for any number of different tasks, but principally for riveting (i.e. staking) components together or for driving components apart. The tool assures that these processes occur in an perpendicular fashion, in that the staking punch is held vertically and the component is positioned directly below the punch in the horizontal. This setup is the basis for the countless other tasks that can be performed with it.

15 holes from Ø3/64" to Ø3/8" can be quickly indexed from a common PCD. 

This kit includes the iron casting, a blank for the top plate and all other bar sections required.  Ideally, the completed top plate should be case-hardened then ground flat.  Great results can be obtained with only simple equipment.